B-Flex BFPRINT50 Ultra Thin

B-Flex Print50 Printable HTV is an ultra-thin printable heat transfer vinyl designed for solvent, eco-solvent and latex print and cut workflows. At just 55 µm thick, BF Print50 is the thinnest printable film offered by B-Flex, making it ideal for soft, lightweight garment graphics that blend beautifully with the fabric.

Made from PU/polyurethane film with a white matte finish, B-Flex Print50 is designed for full-colour custom apparel, uniforms, sportswear, promotional garments and detailed print and cut graphics. It applies in just 6 seconds at 140°C, helping reduce heat exposure on garments while supporting a long-lasting result. B-Flex recommends waiting at least 8 hours after printing before cutting and applying the product.

Key Features

• Ultra-thin printable heat transfer vinyl for print and cut workflows
• 55 µm PU/polyurethane film for an exceptionally soft garment feel
• White matte finish for clean, professional printed graphics
• Printable with solvent, eco-solvent and latex inks
• Applies in just 6 seconds at 140°C
• Sticky polyester carrier supports easy cutting and handling
• Can cut details as small as 5 mm when set up correctly
• Suitable for organic, synthetic and mixed fabrics
• Free from PVC, plasticisers and heavy metals

Typical Applications

• Soft-feel custom t-shirts, hoodies, polos and apparel
• Full-colour logos, artwork, names and numbers
• Sportswear, teamwear and club apparel
• Workwear, uniforms and branded staff clothing
• Promotional garments, event merchandise and retail apparel
• Detailed print and cut graphics where comfort matters

Why Choose Print50 Printable HTV?

• Ultra-soft finish: The 55 µm film blends into the garment for a lightweight, comfortable feel.
• Fast application: Applies in only 6 seconds, helping speed up production and reduce garment heat exposure.
• Small detail capable: The sticky carrier supports cutting details as small as 5 mm when your cutter is correctly set up.
• Print compatibility: Designed for solvent, eco-solvent and latex ink workflows.
• Clean matte result: The white matte surface gives printed graphics a professional garment finish.

Application Workflow

• Print: Print the design onto the film, do not mirror the artwork.
• Wait: Allow at least 8 hours after printing before cutting and applying.
• Cut: Cut the design using a 45° blade.
• Weed: Remove excess printed material from around the graphic.
• Apply transfer tape: Apply BF Mylar and remove air bubbles.
• Remove from liner: Lift the graphic from the liner using BF Mylar.
• Position: Place the graphic onto the garment.
• Press: Apply at 140°C for 6 seconds using medium pressure.
• Wait: Allow 6 to 7 seconds before removing BF Mylar.
• Peel: Remove BF Mylar semi-hot.
• Test: Always test with your printer, ink, transfer tape, garment and application settings before production.

Technical Specifications

Application Settings

Cut Settings

Wash & Care

• Wait 12 hours after application before the first wash.
• Wash garments inside out.
• Maximum wash temperature for the heat transfer vinyl: 40°C.
• Wash performance can depend on the ink system used, so always refer to your ink manufacturer’s data sheet.
• Always follow the garment manufacturer’s care instructions.
• Test before production to confirm print quality, cutting, transfer, wash performance and fabric suitability.

Product Video

Pro Tip: Print50 is all about soft feel. Use it where the garment needs to stay light and flexible, especially for larger graphics or apparel worn close to the skin. Let prints rest for at least 8 hours before cutting and pressing for best results.

Choose B-Flex Print50 Printable HTV when you need an ultra-soft, ultra-thin printable heat transfer vinyl for solvent, eco-solvent or latex workflows. It is a strong choice for custom apparel, uniforms, sportswear, promotional garments and print and cut graphics where comfort and softness are just as important as print quality.